69
Check accumulated values
Operation/Status
Checking the list of accumulated values on
a pulse meter
The accumulated pulse count values for the pulse meter are displayed in a list. (When a pulse meter is set)
1
Touch [Accumulate/Distrib] in “Oper./
Status”.
1
2
Touch [Pulse acc.].
z The “Pulse acc.” screen is displayed.
2
3
Set the period to be displayed.
z Set the start and end of the period to be displayed.
z The time at the left is the start of the period and the time at
the right is the end.
z If you set the “Adaptor value”, you cannot select the period
to be displayed.
(1) Touch (3-1).
z The “Calendar” dialogue is displayed showing the current
date.
3-
1
(2) Touch the date (3-2).
z Use to select the month you want to check. The
current month is displayed if you touch [ThsMth].
z The settings are registered and the “Calendar” dialogue
closes.
3-
2
4
Select the display item.
(1) Touch [Display data] (4-1).
z The “Display data” dialogue is displayed.
4-
1
Continued on next page
To Next Page
Loading...
