Panasonic CZ-256ESMC3 - Checking the Upper Limit Map Used for Cost Priority Control; [Check Upper Limit Map]

186
Conguring the Hybrid GHP/EHP control
Setting
Checking the upper limit map used for cost
priority control [Check upper limit map]
You can view the content of the upper limit maps automatically generated based on the costs set in the
“Cost settings” screen (P.182).
Automatically generated upper limit maps are generated according to combinations of [Timeslot group],
[Mode], and [OutAirTmpSlt], and you can view the content of each upper limit map by selecting each of
these.
4
Check the details (P.187).
1
Touch [System Settings] in “Settings”.
z The “System settings” screen is displayed.
1
2
Touch [Hybrid GHP/EHP settings].
z Enter the identication number (password level 1 or 2) and
the “Hybrid GHP/EHP settings” screen is displayed.
2
3
Touch [Check upper limit map].
z The “Check upper limit map” screen is displayed.
3