128
Perform remote operation of the unit over a network
Setting
Control remotely
You can remotely control this unit from the browser on a PC.
1
Start the browser.
2
Enter the address required to access the
intelligent controller.
z The address is “https://
***
.
***
.
***
.
***
/intelicon/index.php”.
“
***
.
***
.
***
.
***
” is the IP address set in Network settings.
For example:
https://192.168.1.101/intelicon/index.php
z The login screen is displayed.
3
Enter the “User ID” and “Password”.
z Enter the personal user ID and password set in Web user
settings (P.125).
z The operation screen is displayed.
z The operations are the same as the operations on this unit.
To Next Page
Loading...
