Panasonic CZ-256ESMC3 - Setting Gas Demand Values [Gas Demand Settings]

184
Conguring the Hybrid GHP/EHP control
Setting
Setting gas demand values [Gas demand settings]
Set the gas demand values instructed to outdoor unit when the gas demand level is between 0 and 3 for
each of the groups set in “Outdoor unit settings” (P.177).
y The settings in this screen can be used only when “GHP demand” has been selected in the demand
settings in the “Basic settings” screen (P.175).
4
Put a check mark in the “Select” column.
z Select the group you want to edit.
4
5
Touch [Set].
z The operation dialogue is displayed.
5
Continued on next page
1
Touch [System Settings] in “Settings”.
z The “System settings” screen is displayed.
1
2
Touch [Hybrid GHP/EHP settings].
z Enter the identication number (password level 1 or 2) and
the “Hybrid GHP/EHP settings” screen is displayed.
2
3
Touch [Gas demand settings].
z The “Gas demand settings” screen is displayed.
3