Panasonic CZ-256ESMC3 - Update the Software

201
Maintenance settings
Setting
Update the software
Update the software for this unit from a USB memory device.
A service person should perform this operation.
4
Select the version to update (4-1) and
touch [Strt] (4-2).
z The software update conrmation message is displayed.
4-
2
4-
1
5
Touch [OK].
z A conrmation message appears again.
z To cancel the update, touch [Cancel].
5
6
Touch [Update].
z The update starts. The progress of the update is shown as
a percentage.
z The unit automatically restarts when updating is complete.
1
Open the storage door and connect
a USB memory device to the USB
terminal.
2
Touch [IntelContrlr maint] in “Settings”.
2
3
Touch [Software update].
z Enter the identication number (password level 1 or 2) and
the “Software update” screen is displayed.
3