Panasonic CZ-256ESMC3 - Configuring the Hybrid GHP;EHP Control

172
Conguring the Hybrid GHP/EHP control
Setting
Conguring the Hybrid GHP/EHP control
This chapter explains items such as how to congure the Hybrid GHP/EHP control.
Screen menu Overview Page
Basic settings
Set the mode used for operation. 175
Outdoor unit settings
Set the control for each outdoor unit. 177
Hybrid GHP/EHP O/D unit info
View the current control status. 180
Cost settings
Set cost priority control. 182
Gas demand settings
Set gas demand values. 184
Check upper limit map
Check the upper limit map which is used for cost priority control. 186
Delay time settings
Set delay times. 188
Register power demand point
Register the power demand point inputs. 192
Register gas demand point
Register the gas demand point inputs. 193
Register hotwtr demand point
Register the hot water demand point inputs. 194
Individual map settings
Use upper limit maps that are set individually. 195