Panasonic CZ-256ESMC3 - Backing up Data

130
SettingBacking up/restoring data
Backing up data
You can save the setting data and log data to a USB memory device. You can also backup over a network.
4
Touch [Save] in
“IntelliConStngs&LogFiles”.
z Saving starts. When saving is complete, a message is
displayed.
z When backing up over a network, specify the location to
save to.
z To backup other items, repeat the same procedure.
4
5
Touch when you want to
disconnect the USB memory device.
z Remove your USB memory device after the message
“USB memory can now be safely removed” is displayed.
z Close the storage door after removing the USB memory
device.
5
1
Open the storage door and connect
a USB memory device to the USB
terminal.
z This step is not necessary if you are backing up over a
network.
2
Touch [Backup/CSV Output] in
“Settings”.
z The “Backup/CSV Output” screen is displayed.
2
3
Touch [Backup].
z Enter the identication number (password level 1 or 2) and
the “Backup” screen is displayed.
3