Panasonic CZ-256ESMC3 - Registering a Communication Adaptor

170
Conguring the system
Setting
Registering a communication adaptor
Register communication adaptors connected to this unit to enable communications with the air
conditioning units.
1
Touch [System Settings] in “Settings”.
1
2
Touch [Communication adapter setting].
z Enter the identication number (password level 2) and the
“Communication adapter setting” screen is displayed.
2
3
Put a check mark in the “Select” column.
z Select the communication adaptor to be edited.
3
4
Touch [Sttng].
z The “Edit CommAdptrStgs” dialogue is displayed.
4
5
Change the settings.
Item Explanation
Name Change the name of the communication adaptor.
You can enter up to 16 letters or numbers.
6
Touch [Register].
z The “Edit CommAdptrStgs” dialogue closes.
z To cancel the settings, touch [Cancel].
6
Continued on next page