Panasonic CZ-256ESMC3 - Page 169

169
Conguring the system
Setting
Setting the destination
Set the destination in the “Email Alarm recipient settings” dialogue.
1
Change the settings.
Item Explanation
Mail address Set the mail address to send alarms emails.
The touchscreen keyboard appears when you touch
this and you can change the mail address.
Valid Users with a check mark in this column will be sent
alarm mails.
Adapter
CommuErr
Users with a check mark in this column will be sent
alarm mails when there is a communications error
with the communication adaptor.
I/D unit Disc. Users with a check mark in this column will be sent
alarm mails when there is a disconnected alarm
with an indoor unit.
Send test mail A test mail is sent to the set mail address.
2
Touch [Register].
z To cancel the settings, touch [Cancel].
Conguring outgoing mail