Panasonic CZ-256ESMC3 - Basic Settings for Distribution Calculation

148
Conguring the system
Setting
Basic settings for distribution calculation
Set specied days, cut-off days, particular time slots (regular hour ranges) and days of the week for
calculating distributions.
3
Change the settings.
Item Explanation
SpeciedDay-
Calendar
Set specied days (days where the whole day
will have a special distribution setting, such as
holidays, when the time slot doesn’t matter). These
can be set starting with the current month and up
to 2 years in the future.
(→ “Registering specied days” (P.149))
CtffDay Set the monthly cut-off days (“1” to “28”, “End”).
(→ “Registering cut-off days” (P.149))
RglrHourRnge Set the distribution time slots for each day of the
week.
Regular hour range settings possible if you put a
check mark in “Valid”.
The “Regular hour range settings” dialogue is
displayed when you touch [RglrHourRnge stngs].
(→ “Set the target time slots for distribution
calculation” (P.150))
4
Touch [Register].
z To cancel the settings, touch [Cancel].
4
1
Touch [System Settings] in “Settings”.
z The “System settings” screen is displayed.
1
2
Touch [Calendr sttngs for distr calc].
z Enter the identication number (password level 1 or 2) and
the “Calendr sttgs for distr calc” screen is displayed.
2