Panasonic CZ-256ESMC3 - Reducing the Noise of Outdoor Units [Out Unit Silent Setting]

87
Settings for energy saving
Energy saving
Reducing the noise of outdoor units [Out unit silent setting]
Set a time for the outdoor unit to operate more quietly at night compared to the day.
Note
y This is supported only by some outdoor units.
1
Touch [Energy saving] in “EnergySaving”.
1
2
Touch [Out unit silent setting].
z Enter the identication number (password level 1 or 2) and
the “Out unit silent setting” screen is displayed.
2
3
Put a check mark in the “Select” column
(3-1), and touch [Set.] (3-2).
z The “Setting” dialogue is displayed.
3-
1
3-
2
Note
y This is displayed only for outdoor units for which the out
unit silent setting can be set.
4
Change the settings.
Item Explanation
Start time
End time
Set the start and end times.
Use
to set the time.
The setting ranges are as follows.
y Hours: 00 to 23 (1 hour intervals)
y Minutes: 00 to 59 (1 minute intervals)
Note
y You can make the settings extend over
different dates.
For example: 22:00 to 08:00
Out unit silent The silent operating mode is enabled if
you put a check mark here.
5
Touch [Register].
z The “Setting” dialogue closes.
z To cancel the settings, touch [Cancel].
5
6
Set other indoor units.
z Repeat steps 3 to 5.
Continued on next page