88
Settings for energy saving
Energy saving
7
Touch [Register].
z To cancel the settings, touch [Cancel].
7
The “Out unit silent setting” screen
A: [Select all]/[Clear all] buttons
[Select all] Select all outdoor units.
[Clear all] Cancel selection of all
outdoor units.
B: This switches between “Display” and
“Address” each time you touch it.
C: The outdoor units with a check mark next to
them will be the subject of the changes to the
settings.
D: The out unit silent setting is enabled for the
selected out unit silentt if you put a check
mark here. This is linked with the “Out unit
silent” (“Setting” dialogue) (P.87) setting.
E: The “Setting” dialogue is displayed when you
touch this.
A
B
D
E
C
Reducing the noise of outdoor units [Out unit silent setting]
To Next Page
Loading...
