116
Displaying data in graphs
Energy saving
Setting items freely
When you select [UserSlct], you can display graphs where you can freely select the units and items.
For example, the following combinations are possible.
y The monthly transitions of total operating hours, thermostat ON operating times, and electricity usage
for indoor unit 01 is displayed in a bar chart.
y The daily transitions of set temperatures and indoor temperatures for indoor units 03 and 06 are
displayed in a line graph.
1
Touch [Energy saving mgmt] in
“EnergySaving”.
1
2
Select the type of graph.
z The main screen is displayed.
2
3
Touch [GrphDspSetgs].
z The display settings screen is displayed.
3
4
Set the display range.
z For details, refer to step 4 in “Graphing operating times and
energy usage” (P.109) for bar charts, or step 4 in “Graphing
temperature changes” (P.113) for line graphs.
5
Touch [DispItem set].
z The “DispItem set” screen is displayed.
5
6
Select [UserSlct].
6
Continued on next page
Making the settings
To Next Page
Loading...
