Panasonic CZ-256ESMC3 - Setting the Control for each Outdoor Unit; [Outdoor Unit Settings]

177
Conguring the Hybrid GHP/EHP control
Setting
Setting the control for each outdoor unit
[Outdoor unit settings]
Make the main outdoor unit, group, and registration settings for Hybrid GHP/EHP control for each of the
outdoor units.
4
Put a check mark in the “Select” column.
z Select the outdoor units you want to register.
4
5
Touch [Set].
z The operation dialogue is displayed.
5
Continued on next page
1
Touch [System Settings] in “Settings”.
z The “System settings” screen is displayed.
1
2
Touch [Hybrid GHP/EHP settings].
z Enter the identication number (password level 1 or 2) and
the “Hybrid GHP/EHP settings” screen is displayed.
2
3
Touch [Outdoor unit settings].
z The “Outdoor unit settings” screen is displayed.
3