Panasonic CZ-256ESMC3 - Page 178

178
Conguring the Hybrid GHP/EHP control
Setting
6
Enter the main outdoor unit and group
settings.
6
Item Explanation
Main O/D unit Set which of EHP and GHP will be
prioritised.
y There is no affect on air conditioning unit
operation under normal control conditions.
This only has an affect on operation when
EHP upper limit and GHP upper limit are
both set to “Unlmtd” in individual map
settings.
Group settings Set the group for referencing the value
sent when gas demand is input.
7
Touch [Register].
z The settings are registered and the operation dialogue
closes.
z To cancel the settings, touch [Cancel].
7
8
Put a check mark in the “Register”
column.
z Select the outdoor units for which you want to implement
Hybrid GHP/EHP control. Hybrid GHP/EHP control
instructions are implemented only on those outdoor units
that have a check mark.
8
9
Touch [Register].
z To cancel the settings, touch [Cancel].
9
Setting the control for each outdoor unit [Outdoor unit settings]