Panasonic CZ-256ESMC3 - Setting the Date and Time

204
Maintenance settings
Setting
Setting the date and time
Manually set the date and time. This setting is not necessary of you are using the NTP server (P.123).
3
Setting the date and time.
Item Explanation
Day
Month
Year
Set the date.
Use
to set “Day”, “Month”, and “Year”.
Hours*
Minutes
Seconds
Set the time.
Use
to set “Hours”, “Minutes”, and
“Seconds”.
* The time system for “Hours” is 24 hours.
4
Touch [Register].
z To cancel the settings, touch [Cancel].
4
1
Touch [IntelContrlr maint] in “Settings”.
z The “IntelContrlr maint” screen is displayed.
1
2
Touch [Date settings].
z Enter the identication number (password level 1 or 2) and
the “Date setting” screen is displayed.
2
Note
y Do not turn back the time manually by 30 minutes or more.
Errors may occur in the basic settings on the indoor unit, and distribution results may be affected.