Panasonic CZ-256ESMC3 - Registering the Hot Water Demand Point Inputs [Register Hot Water Demand Point]

194
Conguring the Hybrid GHP/EHP control
Setting
Registering the hot water demand point
inputs [Register hot water demand point]
Register the Di terminal of the main unit or the communication adaptor that inputs the hot water demand
point when an external equipment is connected.
4
Select the Di terminal of the main unit or
communication adaptor from the list at
right (4-1) and touch [Select] (4-2).
z Set the demand point (“HW Demand”).
z You can change the names displayed for demand points.
Touch the text box and change with the touchscreen
keyboard. (Enter a name up to 16 alphanumeric
characters)
4-
1
4-
2
5
Touch [Register].
z To cancel the settings, touch [Cancel].
5
1
Touch [System Settings] in “Settings”.
z The “System settings” screen is displayed.
1
2
Touch [Hybrid GHP/EHP settings].
z Enter the identication number (password level 1 or 2) and
the “Hybrid GHP/EHP settings” screen is displayed.
2
3
Touch [Register hotwtr demand point].
z The “Register hot water demand point” screen is displayed.
3