Panasonic CZ-256ESMC3 - Running a Test Operation

207
Maintenance settings
Setting
Running a test operation
You can run test operations for indoor units for each outdoor unit system address.
(2) Select the line number.
z The settings are registered and the “Line No.” dialogue
closes.
3-
2
4
Select the link.
(1) Touch [Link].
z The “Link” dialogue is displayed.
4-
1
(2) Select the linked system you want to run
the test operation for.
z The settings are registered and the “Link” dialogue closes.
z The outdoor units in the selected linked system are
displayed in a list.
4-
2
Continued on next page
1
Touch [A/C maintenance] in “Settings”.
z The “A/C maintenance” screen is displayed.
1
2
Touch [Test run].
z Enter the identication number (password level 2) and the
“Test run” screen is displayed.
2
3
Select the line number.
(1) Touch [Line No.].
z The “Line No.” dialogue is displayed.
3-
1