Panasonic CZ-256ESMC3 - Initialising the Unit and Setting Log Levels

202
Maintenance settings
Setting
Initialising the unit and setting log levels
Initialise the unit and set an identication number (password) and log output levels.
Initialising
1
Select the type of initialisation.
1
Item Explanation
@FctryShip All data (settings, accumulated data,
distribution data) is deleted.
ResetCumlDataFrToday The accumulated data for the day is
deleted. Use this after performing a test
operation of the air conditioning units, for
example.
2
Touch [Initialize].
z Several conrmation messages will be displayed, so touch
[Yes] each time.
z Initialisation starts.
z When initialising is complete, the message “Settings were
reset. IntelligntCtrlr is restarting...” is displayed.
2
1
Touch [IntelContrlr maint] in “Settings”.
z The “IntelContrlr maint” screen is displayed.
1
2
Touch [Initialize].
z Enter the identication number (password level 2) and the
“Initialize” screen is displayed.
2
All data is deleted when you initialise.
Unless you are the administrator, do not initialise under any circumstances.