Panasonic CZ-256ESMC3 - Page 203

203
Maintenance settings
Setting
Set the log output level
Set a level for outputting the log data recorded in this unit.
The content of the log data output differs according to the log level
that is set.
1
Select the log level.
1
2
Touch [Chng].
z The setting is registered.
2
Setting the PIN (identication number)
Some menus require you to enter an identication number
(password) to perform settings and operations.
If you wish to operate after the screen turns off, entering the
identication number (password) can disable the operation by the
third party.
There are identication numbers (password) for Level 1, Level 2, and
screen lock release.
1
Enter an identication number.
z The touchscreen keyboard appears when you touch the
text box.
z Use an identication number of at least 4 characters
(Ensure both numbers and letters are included).
1
2
Touch [Register].
z The setting is registered.
2
Initialising the unit and setting log levels