111
Displaying data in graphs
Energy saving
10
Select the item.
z Refer to P.107 for the items you can set.
z You can select one item only.
10
11
Select the device name.
z Put a check mark in the “Sel.” column.
z If you have selected “Rankng” as the display method and
“SepUnt” as the graph type, all devices are the target, so
you do not have to select.
11
Note
y The number of units you can select depends on the
settings for display method and graph type.
Display method
Graph type
Plel Cumultve
UntCmpar Up to 4 Up to 4
ChngPrDy 1 only 1 only
12
Set the target values for the axis.
z Touch [Ax1TgtVal] and enter the numbers with the
touchscreen numeric keypad.
z A blue line is inserted to indicate the target values for the
graph.
z You can set any goal.
z This cannot be set if you have selected “Rankng” as the
display method.
12
13
Touch [GraphDsp].
z The graph is displayed in the main screen.
z To cancel the settings, touch [Cancel].
13
Graphing operating times and energy usage
To Next Page
Loading...
