Panasonic CZ-256ESMC3 - Page 159

159
Conguring the system
Setting
Item Explanation
Distrib. Grp. Congure a distribution group to be measured.
The “Distrib. Grp.” dialogue is displayed when
you touch this. Select the distribution group to be
measured and touch [Select].
6
Touch [Register].
z The “Edit pulse meter sttgs” dialogue closes.
z To cancel the settings, touch [Cancel].
6
7
Put a check mark in the “Register”
column.
z Put a check mark next to the pulse meters you want to
enable.
7
8
Touch [Register].
z To cancel the settings, touch [Cancel].
8
The “Pulse meter settings” screen
A: A list of pulse meters with a check mark in the
“Register” column is displayed.
B: Put a check mark next to the pulse meters you
want to edit.
C: Put a check mark next to the pulse meters you
want to enable.
D: The “Edit pulse meter sttgs” dialogue is
displayed when you touch this.
B C
A
D
Basic settings for the pulse meter