Panasonic CZ-256ESMC3 - Page 19

19
Preparations before changing settings
Preparation
Menu list
Settings
Settings (Perform other miscellaneous settings)
Submenu Screen menu Overview Page

Calendr sttngs for distr calc
Set specied days, cut-off days, particular time slots (regular hour ranges) and days of
the week for calculating distributions.
148

I/D unit settings
Change settings on indoor units, such as indoor unit addresses, groups belonged to, etc. 141

O/D unit settings
Change settings on outdoor units (addresses, etc.). 145

Schedule group name settings
Edit the name of the schedule group. 151

Area group name settings
Edit the name of the area group. 153

Distribution group settings
Edit the name of the distribution group. 155

Pulse meter settings
Make allocations between pulse meters and distribution groups. 158

Distribution mode settings
Set the mode used for distributing when calculating charges. 160

Distribution Ratio settings
Set the units for calculating electricity and gas usage charges. 161

Event control
Perform linked control by setting input and output conditions for devices. 162

Network settings
Make settings to enable remote control over a network. 123

Email settings
Congure the outgoing mail server. 168

Web user settings
Register users that will access the unit over a network. 125

Communication adapter setting
Register the communication adaptor connected to this unit. 170

Check conguration*
Modify the registered conguration when there have been changes to the conguration
of the system.
226

Hybrid GHP/EHP settings
Make settings for Hybrid GHP/EHP control. 172

Backup
Save data (settings, accumulation/distribution, logs) to USB memory devices. 130

Restore
Restore data that has been stored in the unit or saved to a USB memory device. 132

CSV Output
Export (output) the settings for this unit in CSV format. 134

CSV Input
Import (input) the settings for this unit in CSV format. 136

Auto-save CSV le
Saves the CSV les (distributions, logs) automatically generated in this unit. 138

Display/Volume settings*
Adjust the brightness of the unit’s screen and the sound of the buzzer. 199

Intelligent Controller info
Register the contacts for servicing (telephone numbers) for this unit. 200

Software update*
Update the software for this unit. 201

Initialize*
Initialise the settings for this unit. 202
All data will be lost when you initialise.
Do not initialise under any circumstances.

Language&TimeZone sttngs
Set the language to be used when setting and operating this unit. 205

Date settings
Manually set the date and time. 204
Open license
The licences for the freeware is displayed. —

Test run
Perform a test operation of the indoor unit after installing this unit. 207

A/C communication settings
Make settings such as the communications protocol between this unit and the air
conditioning units.
210

Maintenance information
Register the units that will require maintenance. 212
* These settings are not available for setting or operation over the network.
Menus marked with   require you to enter the identication number (password) when you select them.
 menus require entry of the level 1 or higher identication number, while  requires the level 2 identication number.
Refer to “Input of the identication number (password)” (P.22) for details.