Panasonic CZ-256ESMC3 - Page 31

31
Check the operation and status of air conditioning units
Operation/Status
3
Change the settings.
z A conrmation message appears.
3
Note
y This setting is linked with “I/D unit demand settings”. (→
“Demand settings on the indoor unit” (P.90))
4
Touch [Yes].
z The setting is registered.
4
1
Put a check mark in the “Select” column.
z Select the indoor units whose settings you want to change.
z You can select multiple indoor units.
1
2
Touch [Demand].
z The “Demand setting” dialogue is displayed.
2
Checking the operational status of indoor units
Changing the demand control settings
Switch between setting and cancelling demand control. Refer to “Demand settings on the indoor unit” (P.90) for information about demand
control.