34
Check the operation and status of air conditioning units
Operation/Status
“O/D unit information” screen
A: [Select all]/[Clear all] buttons
[Select all] Select all outdoor units.
[Clear all] Cancel selection of all
outdoor units.
B: Outdoor unit details are displayed in a list.
You can scroll up or down by swiping or icking the screen.
Item Explanation
[Select] Select the units you want to set demand control for.
Name The names of the outdoor units are displayed.
You can change the names. (→ “Basic settings on the outdoor unit” (P.145))
OutdrTmp The temperature outside is displayed.
Demand Demand control setting status is displayed.
(→ “Demand settings on the outdoor unit” (P.93))
Silent This displays the operational status of the out unit silent. (→ “Reducing the noise of outdoor units” (P.87))
y This is supported only by some outdoor units.
Current oil change time The number of operating hours after the last oil change is displayed.
(Available only when using a gas heat pump)
Engine oil check sign This displays the check sign for engine oil.
(Available only when using a gas heat pump)
y If this sign is displayed, contact the place of purchase or your servicing agent to have the oil replaced.
Inverter instant.(kW) This displays the current value for the inverter generator instantaneous value of the ECO G HIGH POWER.
Solar instant.(kW) This displays the current value for the solar generator instantaneous value of the ECO G HIGH POWER.
C: Change silent mode.
The “Demand” dialogue is displayed when you touch this.
(→ “Changing the demand control settings” (P.35))
D: The contents currently displayed are output to the USB memory device as a CSV le. (→ “Outputting (saving) the displayed
contents as a CSV le” (P.32))
A
B
CD
Checking the operational status of the outdoor unit
To Next Page
Loading...
