57
Setting a schedule
Operation/Status
7
Touch [Register].
z The settings are registered and the “Detail setting”
dialogue closes.
z To cancel the settings, touch [Cancel].
7
8
Touch [Register].
z The setting is registered.
z To cancel the settings, touch [Cancel].
8
Note
y Even if you change the schedule in this screen, the daily running
mode settings in the “Schedule setting” screen will not be changed.
y You do not need to add settings to “Calendar” dialogue in
temporarily modifying.
The “Update schedule” screen
A: Select the year, month, and day to change.
y Only the current date and the next 4 days
are shown in this area.
B: You can delete the selected schedule either
by indoor unit or by schedule group.
(→ “Deleting a schedule” (P.48))
C: You can copy the selected schedule either
by indoor unit or by schedule group. (→
“Copy a schedule for setting” (P.48))
D: Paste the schedule specied at C to an
indoor unit or schedule group.
(→ “Copy a schedule for setting” (P.48))
E: View the operating schedule for a single day
in a list.
F: When you touch this, the “Detail setting”
dialogue is displayed for indoor units or
schedule groups with a check mark in the
“Select” column.
A
C DB
E
F
Temporarily modifying or adding a schedule
To Next Page
Loading...
