Panasonic CZ-256ESMC3 - Page 63

63
Checking the alarm logs and operation/status change logs
Operation/Status
4
Touch when you want to
disconnect the USB memory device.
z The message “USB memory can now be safely removed”
is displayed. Touch [OK] and then remove the USB
memory device.
z Close the storage door after removing the USB memory
device.
4
1
Open the storage door and connect
a USB memory device to the USB
terminal.
2
Touch [CSV Output].
z A conrmation screen is displayed.
2
3
Touch [OK].
z The log currently displayed is saved to the USB memory
device in CSV format.
z When saving is complete, a message conrming that
saving is complete is displayed.
Checking the operation/status change log in a list
Outputting (saving) logs as a CSV le