81
Settings for energy saving
Energy saving
7
Touch [Register].
z To cancel the settings, touch [Cancel].
7
Item Explanation
Auto stop time Set the time to automatically stop after operation
is started.
Use
to set the time.
You can set between 0 and 180 minutes
(5 minute intervals).
Auto shutoff The auto shutoff function is enabled for the
selected indoor unit if you put a check mark
here.
y Stop at every
set time
y Stop by
elapsed time
Select the stop conditions.
y “Stop at every set time”
Even after automatically stopping at
the “Start time”, the unit continues to
automatically stop repeatedly at the “Auto
stop time” interval.
y “Stop by elapsed time”
After automatically stopping at “Start time”
automatic stopping only happens after the
“Auto stop time” has elapsed if the indoor
unit is running.
y All day
y Specify time
Select the time conditions.
y “All day”
Automatic stopping at “Auto stop time”
continues repeatedly throughout the day.
(“Timer settings” is ignored)
y “Specify time”
Auto shutoff is repeated between the “Start
time” and the “End time”.
5
Touch [Register].
z The “Setting” dialogue closes.
z To cancel the settings, touch [Cancel].
5
6
Set other indoor units.
z Repeat steps 3 to 5.
Automatically stopping restarts [Unattended auto shutoff]
To Next Page
Loading...
