97
Settings for energy saving
Energy saving
The “Demand/peak shaving settings” screen
A: [Select all]/[Clear all] buttons
[Select all] Select all outdoor units.
[Clear all] Cancel selection of all
outdoor units.
B: This switches between “Display” and
“Address” each time you touch it.
C: The outdoor units with a check mark next to
them will be the subject of the changes to the
settings.
D: The outdoor time slot demand setting is
enabled for the selected outdoor unit if you
put a check mark here. This is linked with
the “Demand/peak shaving Valid” (“Setting”
dialogue) (P.96) setting.
E: The “Setting” dialogue is displayed when you
touch this.
A
B
D
E
C
Suppressing the consumption of electricity/gas [Demand/peak shaving settings]/[Peak cut settings]
To Next Page
Loading...
