Panasonic FP Series Technical Manual

FP Modem-EU Technical Manual
2.3 DIP Switches
It is possible that the very first FP Modem-EU's DIP4 function will not work
correctly with a completely new modem from stock. If this happens, please use
the AT*W command to set up the baud rate.
13

Panasonic FP Series Specifications

General

Mounting	DIN rail
Type	PLC
Communication Interface	RS-232, RS-485, Ethernet (depending on model)
Input Voltage	100-240V AC or 24V DC (depending on model)
Output Type	Relay, Transistor
I/O Points	Varies by model
Operating Temperature	0°C to 55°C
Dimensions	Varies by model
Weight	Varies by model