Panasonic FP7 Series User Manual

(Note 1) The unit number and COM. port number in the above program is applied when the COM.1 port of the
CPU unit is used.
● When you do not wish to add the terminator (end code), use a negative value for specifying the
No. of sent data in GPSEND instruction. Select "SS" for operation unit.
9.3 Sending Operation
WUME-FP7COM-07 9-17

Panasonic FP7 Series Specifications

General

Brand	Panasonic
Model	FP7 Series
Category	Controller
Language	English