Panasonic FP7 Series User Manual

(Note 1) For checking communication parameters with PMGET instruction, the CPU should be set in the RUN
mode. Set Mode selection when self-diagnostic error occurs>A unit error occurred. to "Continue
operation" in the CPU configuration.
(Note 2) When the power is turned off, the settings changed with the PMSET instruction are not retained and
are restored to the settings configured with FPWIN GR7.
10.2 What to Do If an Error Occurs (For Each Communication Mode)
10-6 WUME-FP7COM-07

Panasonic FP7 Series Specifications

General

Brand	Panasonic
Model	FP7 Series
Category	Controller
Language	English