Panasonic FP7 Series User Manual

● A part of a command message (6 bytes from the beginning) is returned for multiple write
command.
■
Response in abnormal status
In case a parameter disabled to be processed is found in a command (except transmission
error)
Slave address (Unit No.)
Function code + 80H
Error code
CRC
1, 2, or 3
■
Error code contents
1. Function code error
2. Device No. error (outside the range)
3. Device quantity error (outside the range)
11.4 MODBUS RTU Format
WUME-FP7COM-07 11-11

Panasonic FP7 Series Specifications

General

Brand	Panasonic
Model	FP7 Series
Category	Controller
Language	English