Programming Manual References
None
Feature Manual References
3.1.11 CALL WAITING FEATURES
Pickup Dial Set
Sets or cancels the Hot Line feature. The number specified in Pickup Dial No. on this screen is dialed
automatically after going off-hook when the Hot Line feature is active.
Default
Off
Value Range
Off, On
Maintenance Console Location
6.1 [4-1-1] Wired Extension—Extension Settings
Programming Manual References
4.5 [2-3] Timers & Counters—Dial / IRNA / Recall / Tone—
Dial—Hot Line (Pickup Dial) Start
Feature Manual References
8.1.6 Hot Line
Pickup Dial No.
Specifies the number to be dialed automatically after going off-hook when the Hot Line feature is active.
Default
Not stored.
Value Range
Max. 32 digits (consisting of 0–9, *, #, T [Transfer], [ ] [Secret], P [Pause], and F [Flash])
Maintenance Console Location
6.1 [4-1-1] Wired Extension—Extension Settings
Programming Manual References
None
Feature Manual References
8.1.6 Hot Line
556 PC Programming Manual Document Version 2009-12
6.1 [4-1-1] Wired Extension—Extension Settings
To Next Page
Loading...
