Parameter Selection (for Time Service - Automatic/Manual)
Specifies the Time Table to be used when the Time Service Switching Mode is set to Automatic.
Default
1
Value Range
1–8
Maintenance Console Location
6.17 [4-3] DSS Console
Programming Manual References
4.6 [2-4] Week Table
Feature Manual References
17.1.5 Time Service
Parameter Selection (for SDN)
Specifies the delayed ringing setting for calls arriving at an SDN button.
Default
Immediate
Value Range
Immediate, 1 Ring, 2 Rings, 3 Rings, 4 Rings, 5 Rings, 6 Rings, No Ring
Maintenance Console Location
6.17 [4-3] DSS Console
Programming Manual References
None
Feature Manual References
13.1.7 PDN (Primary Directory Number)/SDN (Secondary Directory Number) Extension
Ext. No. / Floating Ext. No. (for DSS)
Specifies the number of an extension to be accessed.
Default
Not stored.
Value Range
Max. 5 digits (consisting of 0–9)
686 PC Programming Manual Document Version 2009-12
6.17 [4-3] DSS Console
To Next Page
Loading...
