De-registration of Non-KX-UT Series SIP Phones (including P-SIP)
The de-registration of non-KX-UT series SIP phones is carried out by deleting either the extension number or
password registered in the PBX.
1.
a. Click Setup ® PBX Configuration ®
Configuration ® Slot.
b. Place the mouse cursor over the Virtual Slot, and
in the menu that appears, click Select Shelf.
c. Move
the mouse pointer over the V-SIPEXT32 card
(Virtual 32-Channel SIP Extension Card).
A menu will be shown under the mouse pointer.
d. Click Port Property.
2.
a. Click the cell in the Connection column for the port
of the SIP phone to de-register.
b. In the Command window, click OUS to change the
status of the port to "OUS".
3. Repeat step 2 for each SIP phone to de-register.
4. Delete either the extension number or password for the
SIP phone to de-register, as shown here.
5. Click OK.
Document Version 2016-03 Installation Manual 229
5.8.2 De-registering IP Telephones
To Next Page
Loading...
Need help?
General