Panasonic KX-NS Series Installation Manual

3.1.3 Using CTI Applications
To
use CTI applications with the PBX, KX-NSF101 (CTI interface) is required. One KX-NSF101 supports one
CTI application. However, Communication Assistant (CA) Server does not require KX-NSF101.
In the example below, one KX-NSF101 is required for using one CTI application.
Example 1
PBX
Single CSTA
Connection
CTI Server
In the example below, an activation key is not required to use CA Server.
Example 2
PBX
Single CSTA
Connection
CA Server
To use 2 or more CTI applications, the CSTA Multiplexer application is required, along with one KX-NSA020
(CSTA Multiplexer) for each CTI application.
KX-NSF101 is included in KX-NSA020. Therefore, when
KX-NSA020 is installed, KX-NSF101 is not required.
In the example below, three KX-NSA020 are required for three CTI applications. (CA Server does not require
a KX-NSA020.)
Document Version 2016-03 Installation Manual 69
3.1.3 Using CTI Applications

Panasonic KX-NS Series Specifications

General

Brand	Panasonic
Model	KX-NS Series
Category	PBX
Language	English