4.2.3 Opening/Closing the Top Cover
Opening the Top Cover
KX-NS700/KX-NS720
CAUTION
Before opening the top cover, the AC power cord must be removed from the AC inlet.
1. Confirm that the power switch is turned off and disconnect the power cable.
Note
In order to turn off the PBX’s power, a system shutdown using Web Maintenance Console must first
be performed. For details, refer to "5.4 System Control—System Shutdown" in the PC Programming
Manual.
2. Turn the screws counterclockwise to loosen.
Document Version 2016-03 Installation Manual 77
4.2.3 Opening/Closing the Top Cover
To Next Page
Loading...
Need help?
General