Panasonic KX-NS1000 - Page 317

Button Steps
Secondary Directory Number
(SDN)
Select SDN from Type.
Then enter the extension number in Extension Number.
In Parameter Selection, specify the delayed ringing setting for calls
arriving at an SDN button.
To specify the ring tone, select the ring tone type from Optional
Parameter (Ringing Tone Type Number).
Check-in Select Check In from Type.
Check-out Select Check Out from Type.
Cleaned-up Select Cleaned Up from Type.
Two-way Record
Select Two-way Record from Type.
Then enter the UM group’s floating extension number in Extension
Number. (The UM group’s default floating extension number is 500.
*1
)
Two-way Transfer
Select Two-way Transfer from Type.
Then enter the UM group’s floating extension number in Extension
Number. (The UM group’s default floating extension number is 500.
*1
)
Specify the number of the extension whose mailbox will be used to
record conversations using One-touch Two-way Transfer in Ext No. of
Mailbox. (For example, a secretary can record a conversation into the
mailbox of a boss.) If the cell is left empty, the extension user must
specify the number of an extension each time.
One-touch Two-way Transfer
Select Two-way Transfer from Type.
Then enter the UM group’s floating extension number in Extension
Number. (The UM group’s default floating extension number is 500.
*1
)
Enter extension number or incoming call distribution group extension
number to Ext No. of Mailbox.
Live Call Screening (LCS) Select LCS from Type.
Voice Mail Transfer
Select Voice Mail Transfer from Type.
Then enter the UM group’s floating extension number in Extension
Number. (The UM group’s default floating extension number is 500.
*1
)
DN Select DN from Type.
*1
The UM group’s default floating extension number depends on system programming. For more information, consult your System
Administrator or System Manager.
• Rows whose Key Location field is colored can be customized.
• The number of available flexible buttons is displayed in Available Keys on the screen.
• This feature is available only for DPTs and IP-PTs.
• For KX-NT366 and KX-NT553/KX-NT556/KX-NT560 users: You can set the text displayed
for each flexible button for the phone’s Self Labelling feature in Label Name on the Flexible
Button screen.
• For KX-UT248 and KX-UT670 users: You can set the text displayed (a maximum of 10
characters) for each flexible button for the phone’s Self Labelling feature in Label Name on
the Flexible Button screen.
Changing Your Password
You can change your password for the Web Maintenance Console in the Login Account tab of the Edit
User screen.
3.2.1 User Programming
Operating Manual 317