Panasonic KX-TA824 - Page 144

9.1 System [1]
144 Programming Manual
Default
On
Value Range
On (checked), Off (unchecked)
Programming Manual References
[105] Conference Tone
Feature Manual References
1.1.33 Conference
1.1.50 Executive Busy Override—Extension
1.1.51 Executive Busy Override—Outside (CO) Line
DSS—One-touch Transfer Using a DSS Button
Selects how an outside (CO) line call is transferred to an extension using a Direct Station Selection (DSS)
button.
Default
With Transfer
Value Range
With Transfer, Without Transfer
With Transfer: Press the DSS button to transfer the outside (CO) line call.
Without Transfer: Press the TRANSFER button, then the DSS button to transfer the outside (CO) line call.
Programming Manual References
[005] One-touch Transfer Using a DSS Button
Feature Manual References
1.1.25 Call Transfer—To Extension
1.1.59 Fixed Buttons
DSS—DSS Lamp Mode
Enables the Busy Lamp Field (BLF) on the DSS button to indicate the status, Call Forwarding (FWD) or Do
Not Disturb (DND), of corresponding extensions.
Default
On
Value Range
On (checked), Off (unchecked)
On: FWD – Flashing slowly, DND – Flashing at moderate speed
Off: FWD – Off, DND – Off