Panasonic KX-TA824 - 2.1.7 System Feature Assignment

9.1 System [1]
Programming Manual 145
Programming Manual References
[112] DSS Lamp Mode
Feature Manual References
1.1.70 LED Indication
CO—Pulse dialing during a conversation
Enables the PBX to send pulse dialing to the telephone company during a conversation with an outside
party when Pulse or Call Blocking is selected in
Dial Mode on the 9.3.3 Detail [3-3] screen.
Default
On
Value Range
On (checked), Off (unchecked)
Programming Manual References
[118] Pulse Restriction
9.3.3 Detail [3-3]—Dial Mode
CO—Redialing after Pulse to Tone Conversion
Enables the PBX to send DTMF (Dual Tone Multi-Frequency) dialing to the telephone company when an
extension user redials after changing from pulse mode to DTMF mode by pressing "
#".
Default
Off
Value Range
On (checked), Off (unchecked)
Programming Manual References
[119] Redialing after Pulse to Tone Conversion
Feature Manual References
1.1.104 Pulse to Tone Conversion
DTMF Receiver Test—DTMF Receiver 1–6
Enables each DTMF receiver to check whether it is operating normally or not.
Default
All DTMF receivers: On
Value Range
On (checked), Off (unchecked)
DTMF receiver number: