Panasonic SD-PT1002 - Control Panel; Current Time (Clock Displays) Adjustment; Replace Lithium Battery

EN7
ꨶ寒
䭾
ꨶ寒
䭾
ꨶ寒
䭾
Ӫ Put in raisins and other
ingredients (P. EN18 - EN20)
(袖蟏✝ (Raisin))
(Ꟛ㨥 (Start))
(《嶋 (Cancel))
(갸秉 (Timer))(掑蒀 (Crust colour))
(굺陗 (Menu))
(儘 / ⴕ (Hour / minute))
(The LCD display will disappear when the power plug is unplugged.)
ӪChange crust colour (P. EN21) ӪSetting timer for completion time (P. EN22)
*Use the lithium battery to enable the bread maker
to memorize current time and previous settings.
Battery base
Lithium battery
Lithium battery
(
Anode facing
downwards)
Turn over the
battery base
*Please confirm that the battery does not drop down.
* Baking can be started even if the lithium battery is not installed.
Install the
lithium battery
with anode
facing upwards
Ӫ Start program
and timer
ӪReset
Ӫ
Cancel after
started (hold)
ӪSelect menu
ӪPull out the insulating film in advance (P. EN6)
ӪThe time is displayed in the 24 hour system.
Ӫ
Release fingers when a beep sound is heard.
ӪCompleted when flashing stops.
΍Plug in
*You cannot adjust time if it is not plugged in.
ΐPull out the power plug
*Time adjustment cannot be completed if you
pull out the power plug before the flicker stops.
΍Take out the battery base
Ύ
Secure the battery with left hand by holding
the base in front. Take out the battery.
Ώ Turn the battery base upside down and
install the battery. Install the battery
base back in the main unit.
ΏAdjust time
*Adjust time when flashing
(e.g. adjust the time to 3:30 p.m.)
ΎPress 儘 (H) or ⴕ (M) (time display flashes)
Menu
ӪSet timer (P. EN22)
ӪAdjust current time (See below)
ӪSet cooking time (P. EN76, EN78)
Current time (clock displays)
adjustment
Replace lithium battery
Control panel
Hold for fast
forward
)(
Before use
Parts Names and Accessories