Panasonic WV-SW355

108
108 109
Configure the schedule settings of the FTP periodic image
transmission [FTP img. trans.]
Click the [FTP img. trans.] tab on the "Network" page. (☞Pages24and25:Howtodisplay/operatethesetup
menu)
The schedule settings of the FTP periodic image transmission can be configured in this section. Refer to page 107
for further information about the settings relating to the FTP periodic image transmission.
How to set the schedules
Step 1
Check the check box of the desired day of the week of
"FTP image transmission schedule".
→ The selected day of the week will be validated for
the schedule.
Step 2
To designate time, click [C] and select the desired
"hour" and "minute".
When not designating time, check the checkbox of
"24h".
Step 3
Click the [Set] button after completing the settings.
→ The result will be displayed at the bottom of the
window.