Panasonic WV-SW355

36
36 37
Access copy images saved on the SD memory card onto the PC
[SD memory card images]
Click the [SD memory card] tab on the "Basic" page. (☞Pages24and25:Howtodisplay/operatethesetupmenu)
The following are descriptions of how to copy images saved on the SD memory card onto the PC. It is necessary in
advance to select "Allow" for "FTP access to camera" on the "Network" tab of the "Network" page. (☞ Page 87)
Important:
 • ItmaysometimesbeimpossibletooperatewhenanotheruserisaccessingimagesontheSDmemorycard.In
this case, retry later.
 • Dependingonthesettingsofaproxyserverorafirewall,imagesmaynotbeobtainedviaanetwork.Inthis
case, refer to the network administrator.
Step 1
Click the [Execute] button of "Access img.".
→ The user authentication window will be displayed.
Step 2
Clickthe[OK]buttonafterenteringtheusernameand
password of the camera administrator.
→ The folder in which images are to be saved will be
displayed.
Note:
 • WhentheFTPserverofthecameraisloggedto
access images, the SD memory card is assigned to
Drive B.
Images are saved in different directories according
to "Save trigger".
Move to the directory corresponding to the desired
images and copy them.
Refer to page 129 for further information about the
directory structure.