Panasonic WV-SW355

82
82 83
Configure the settings relating to the NTP server [NTP]
Click the [NTP] tab on the "Server" page. (☞Pages24and25:Howtodisplay/operatethesetupmenu)
The settings relating to the NTP server such as the NTP server address, port number, etc. can be configured on this
page.
Important:
 • UseanNTPserverwhenthemoreaccuratetime&datesettingisrequiredforthesystemoperation.
[Time adjustment]
Select the time adjustment method from the following.
Time adjusted by the selected method will be used as
the standard time of the camera.
Manual: Time set on the [Basic] tab on the "Basic"
page will be used as the standard time of the cam-
era.
Synchronization with NTP server: Time automatically
adjusted by synchronizing with the NTP server will
be used as the standard time of the camera.
Default: Manual
[NTP server address setting]
When "Synchronization with NTP server" is selected for
"Time adjustment", select the method of how to obtain
the NTP server address from the following.
Auto:ObtainstheNTPserveraddressfromtheDHCP
server.
Manual: The NTP server address will be entered manu-
ally on "NTP server address".
Default: Manual
Important:
 • WhenobtainingtheNTPserveraddressfromthe
DHCP server, it is necessary to select "DHCP" or
"Auto" for "Network Settings" on the [Network] tab
of the "Network" page. (☞ Page 83)
[NTP server address]
When "Manual" is selected for "NTP server address
setting", enter the IP address or the host name of the
NTP server.
Available number of characters: 1 - 128 characters
Default: None (blank)
Important:
 • Whenenteringthehostnamefor"NTPserver
address", it is necessary to configure the DNS set-
tings on the [Network] tab of the "Network" page.
(☞ Page 84)
[NTP port]
Enter a port number of the NTP server.
Available port number: 1 - 65535
Unavailable port number: refer to the help window.
Default: 123
[Time adjustment interval]
Selectaninterval(1-24hours:in1hourintervals)of
synchronization with the NTP server.
Default: 1h
[Time zone]
Select a time zone corresponding to the location where
the camera is in use.
Default:(GMT)GreenwichMeanTime:Dublin,
Edinburgh, Lisbon, London