Panasonic WV-SW355

40
40 41
Configure the settings relating to the logs [Log]
Click the [Log] tab on the "Basic" page. (☞Pages24and25:Howtodisplay/operatethesetupmenu)
The settings relating to the log list can be configured in this section.
■ Alarm
Settings for the alarm log list can be performed.
[Save logs]
Select"On"or"Off"todeterminewhethertosavethe
alarm logs.
On: Alarm logs will be saved.
Off: Alarm logs will not be saved.
Default:On
Note:
 • When"H.264"isselectedfor"Recordingformat"
and when "Manual" or "Schedule" is selected for
"Save trigger", alarm logs will not be saved.
 • When"Recordingformat"issetto"H.264","Save
logs"issetto"On"or"Off"dependingontheset-
ting of "Save trigger".
[Name of the destination directory for downloaded
images]
Enter the name of the destination directory to which
images associated with the logs are to be downloaded.
Forexample,enter"C:\alarm"todesignatethefolder
"alarm" under drive C.
Available number of characters: 3 - 128 characters
Available characters: Alphanumeric characters, the
slash(/),thebackslash(\),thecolon(:)andthe
underscore (_).
■ Manual/Schedule
Configure the settings relating to manual saving or
schedule saving of the log list.
Select"On"or"Off"anddesignatethedestination
folder in the same manner as for "Alarm".
Note:
 • When"Recordingformat"issetto"H.264","Save
logs"issetto"On"or"Off"dependingontheset-
ting of "Save trigger".
 • Schedulesavingisavailableonlywhen"H.264"is
selected for "Recording format".
■ FTP error
Perform the settings for the FTP error log list.
Select"On"or"Off"anddesignatethedestination
folder in the same manner as for "Alarm".
Important:
 • When"Namew/otime&date"isselectedfor"File
name" on the [FTP img. trans.] tab on the "Network"
page, FTP error log and associated images will not
be saved. To save them, select "Name w/
time&date". (☞ Page 107)
Note:
 • When"H.264"isselectedfor"Recordingformat",
"FTP error" is unavailable.