54
*1 It is necessary to designate the unicast port number
when "Unicast port (MANUAL)" is selected for
"Transmission type".
*2 It is necessary to designate the multicast IP address
when "Multicast" is selected for "Transmission
type".
Configure the settings relating to images, extra optical zoom,
focus, privacy zone and VIQS [Image quality]
Click the [Image quality] tab on the "Image/Audio" page. (☞Pages24and25:Howtodisplay/operatethesetup
menu)
When the [Setup>>] button of each setting item is clicked, the detailed settings menu will be displayed in a newly
opened window. The detailed settings can be configured while monitoring images displayed on the [Image quality]
tab.
The settings relating to images, extra optical zoom, focus, privacy zone and VIQS can be configured in this section.
[Image adjust]
Click the [Setup>>] button to display the setup menu
that can configure the settings relating to image quality.
The setup menu will be displayed in a newly opened
window. (☞ Page 55)
[Extra optical zoom]
Click the [Setup>>] button to display the setup menu
that can configure the settings relating to extra optical
zoom. The setup menu will be displayed in a newly
opened window. (☞ page 60)
[Focus]
Click the [Setup >>] button to display the setup menu
that can configure the settings relating to focus. The
setup menu will be displayed in a newly opened win-
dow. (☞ page 60)
[Privacy zone]
Click the [Setup>>] button to display the setup menu
that can configure the settings relating to the privacy
zone. The setup menu will be displayed in a newly
opened window. (☞ Page 61)
[VIQS]
Click the [Setup>>] button to display the setup menu
that can configure the settings relating to VIQS. The
setup menu will be displayed in a newly opened win-
dow. (☞ page 62)
To Next Page
Loading...
