Panasonic WV-SW355

46
46 47
Configure the settings relating to H.264 images [JPEG/H.264]
Click the [JPEG/H.24] tab on the "Image/Audio" page. (☞Pages24and25:Howtodisplay/operatethesetup
menu)
[JPEG/H.264] tab will be displayed when "H.264" is selected for "Video encoding format".
Configure the settings relating to H.264 image such as "Max bit rate (per client)", "Image capture size", "Image
quality", etc. in this section. Refer to page 51 and 45 for the settings relating to MPEG-4 images and JPEG images
respectively.
[Video encoding format]
Select H.264 for the video encoding format.
H.264: H.264 will be set for the video encoding format.
The subsequent setting items will be for H.264. The
tab name will be changed to [JPEG/H.264].
MPEG-4: MPEG-4 will be set for the video encoding
format. The subsequent setting items will be for
MPEG-4. (☞ Page 51)
The tab name will be changed to [JPEG/MPEG-4].
Default: H.264
■H.264 (1) · H.264 (2)
[H.264 transmission]
Select"On"or"Off"todeterminewhetherornotto
transmit H.264 images.
On: Transmits H.264 images.
Off: Does not transmit H.264 images.
Default:On
Note:
 • When"On"isselectedfor"H.264transmission"in
"H.264(1)" or "H.264(2)", displaying of H.264 images
or JPEG images on the "Live" page will become
available.
 • When"On"isselectedfor"H.264transmission"in
"H.264(1)" and "H.264(2)", H.264 images are view-
able using other devices with each setting.
 • When"On"isselectedfor"H.264transmission"in
"H.264(1)" or "H.264(2)", the transmission interval of
JPEG images may sometimes become longer.
 • When"H.264"isselectedfor"Recordingformat",it
is impossible to transmit H.264 images with the set-
tings for "H.264(2)". In this case, the settings for
"H.264(2)" are invalidated.
[Internet mode (over HTTP)]
Select"On"whentransmittingH.264imagesviathe
Internet. It is possible to transmit H.264 images without
changing the broadband router settings configured for
JPEG image transmission.
On: H.264 images and audio will be transmitted using
the HTTP port. Refer to page 84 for further informa-
tion about the HTTP port number settings.
Off: H.264 images and audio will be transmitted using
the UDP port.
Default:Off
Note:
 • When"On"isselected,only"Unicastport(AUTO)"
will be available for "Transmission type".
 • When"On"isselected,itmaytaketimetostartdis-
playing H.264 images.