Panasonic WV-SW355

22
22 23
About the network security
Equipped security functions
The following security functions are featured in this camera.
q Access restrictions by the host authentication and the user authentication
It is possible to restrict users from accessing the camera by setting the host authentication and/or the user
authenticationto"On".(☞ Pages 77 and 78)
w Access restrictions by changing the HTTP port
It is possible to prevent illegal access such as port scanning, etc. by changing the HTTP port number. (☞ Page
84)
e Access encryption by the HTTPS function
It is possible to enhance the network security by encrypting the access to cameras using the HTTPS function.
(☞ Page 89)
Important:
 • Designandenhancesecuritycountermeasurestopreventleakageofinformationsuchasimagedata,authenti-
cation information (user name and password), alarm mail information, FTP server information, DDNS server
information, etc. Perform the countermeasure such as access restriction (using the user authentication) or
access encryption (using the HTTPS function).
 • Afterthecameraisaccessedbytheadministrator,makesuretoclosethebrowserforaddedsecurity.
 • Changetheadministratorpasswordperiodicallyforaddedsecurity.
Note:
 • Whenuserauthentication(authenticationerror)hasfailedtopass8timeswithin30secondsusingthesameIP
address (PC), access to the camera will be denied for a while.