Panasonic WV-SW355

94
94 95
Configuration of the connection protocol
Step 1
Select "HTTP" or "HTTPS" for "Connection" to deter-
mine the protocol used to access the camera.
HTTP:OnlytheHTTPconnectionisavailable.
HTTPS:OnlytheHTTPSconnectionisavailable.
Step 2
Designate the HTTPS port number to be used for
"HTTPS port".
Available port number: 1 - 65535
Default: 443
The following port numbers are unavailable since they
are already in use.
<Port numbers already in use>
20, 21, 23, 25, 42, 53, 67, 68, 69, 80, 110, 123, 161,
162, 554, 995, 10669, 10670, 59000 - 61000
Step 3
Click the [Set] button.
→ The camera will restart, and it will become possible
to access to the cameras using the HTTPS protocol.
(☞Page6:MonitorimagesonaPC,page12:
Monitor images on a cellular phone)
Note:
 • The camera will restart after the connection setting
is changed.
 • Notationwhenusingtheself-signedcertificate:
If the camera is accessed using the HTTPS protocol
for the first time, the warning window will be dis-
played. In this case, follow the instructions of the
wizard to install the self-signed (security) certificate.
(☞ Page 96)
 • Notationwhenusingtheservercertificate:
In advance, install the root certificate and intermedi-
ate certificate on the browser in use. Follow the
instructions of CA for how to obtain and install these
certificates.
 • WhenthecameraisaccessedusingtheHTTPSpro-
tocol, the refresh interval and frame rate of images
may be lower.
 • WhenthecameraisaccessedusingtheHTTPSpro-
tocol, it may take time to display images.
 • WhenthecameraisaccessedusingtheHTTPSpro-
tocol, the images may be distorted or audio may be
interrupted.
 • Themaximumnumberofconcurrentaccessuser
varies depending on the maximum image size and
transmission format.